Skip to main content

Query And Retrieve Studies From DICOM Devices

You can search other DICOM devices, such as a remote PACS (Picture Archiving and Communication System) or an archive, for studies and pull them into OmegaAI. OmegaAI does this through OmegaAI Link.

There are two parts:

  • DICOM Query Echo: Checks whether a DICOM station is reachable.
  • DICOM Query Search: Searches for studies on a DICOM station, and retrieves them into OmegaAI.

Before You Begin​

Check That A Station Is Reachable (DICOM Query Echo)​

  1. In the left navigation bar, click Organization.

  2. Select your organization, and then click Details.

  3. In the settings menu, click Device.

  4. In the Devices list, select the OmegaAI Link that the station is connected to. Its stations appear in the Stations list.

  5. In the Stations list, select the station.

  6. In the station's General section, click TEST CONNECTION.

    OmegaAI Link

Expected result: If the station answers, the message Connection Succeeded. appears.

Note: The status badge next to TEST CONNECTION shows Online or Offline. It's kept up to date only when Enable Heartbeat is turned on for the station.

  1. In the search bar at the top of OmegaAI, click the dropdown arrow.

  2. Select DICOM Query. A panel opens.

  3. Enter the search details:

  • Organization (required): The organization the DICOM objects belong to. Matches appear as you type.
  • Device (required): The station to search. Matches appear as you type.
  • Search fields: Narrow your search further. Click More to add fields; every study column is available, and you can type in the search bar to find a field. Click Delete to remove a field.

OmegaAI Link

  1. Click Search. To discard the search, click Cancel.

Expected result: All matching studies are shown.

For more about the search bar, see Using Global Search.

Retrieve A Study​

  1. In the search results, click the Study avatar for each study you want.

  2. Click RETRIEVE STUDY. The button becomes active only after you select a study.

    After a few seconds, the circular arrow icon is replaced with TRACK, which means the retrieval is in progress.

  3. To follow the retrieval, click TRACK.

Expected result: The Task Log page opens and shows the progress of the retrieval.

Troubleshooting​

ProblemWhat to check
No resultsMake sure you entered both an organization and a device, and that you're associated with that organization. Try fewer search fields.
The query failsRun a DICOM Query Echo. If the station is offline, the query can't reach it. Also check the Link: select it in the Devices list, and look at the status badge in its General section. If the Link shows Offline, queries can't reach any of its stations.
RETRIEVE STUDY is unavailableSelect at least one study first.

For connection problems, see Test Connection to a station fails.